Graphtec Cutting Plotter CE7000-160

Enhanced specifications and excellent cost-effectiveness

סרטונים

MicroJuk
Play Video

Datalink Barcode
Save time and reduce the chance of production errors by using barcodes to automatically process multiple jobs at the touch of a button.
DataLink supports any combination of RIP software & printer in addition to included Cutting Master 4 and Graphtec Pro Studio software.
The CE7000 detects barcode-linked cutting data from the operator’s PC or USB flash memory, opens the correct file, sets the cutting conditions, and starts cutting automatically.

Contour & Die-Cut
Separate tool positions for contour and die-cutting ensure the longevity of your blades and cutting strip when creating decals and graphics that are effortlessly popped out of sheet and roll media.

Improved ARMS for high precision cutting (ARMS 8.0)
The Advanced Registration Mark Sensing system delivers precise Print & Cut results by using sensors to detect registration marks and perform axis alignment. Countless efficiency-boosting features improve productivity for Print & Cut applications such as stickers and decals. Barcodes may now be generated and printed as part of the design which creates a hand’s free operation. The reading of Registration marks is faster increasing productivity.

Network Connection
A network connection is now possible through a network interface enabling the use of TCP/IP protocols to transfer cut data.

USB Offline Operation
A new secondary USB port has been added for placing thumb drives so jobs can be uploaded and cut without the need of a computer. Select barcode function or select file directly from the thumb drive.
(The USB memory format only supports FAT32. Please note that NTFS and exFAT are not supported.)

Fantastic Cutting Force and Cutting Speed
With maximum cutting force 4.41N (450gf) and maximum cutting speed 1000 mm/s, it enables to cut various media with high productivity.
Cutting performance that guarantees accurate 5m length cutting.
The media stocker helps stabilize the feeding of media. By adjusting the pressure of the middle push roller to the media in three levels, it prevents media floating.
In addition, by using an optional special basket, stability in long cuts can be achieved.

User-friendly control panel
The 3.7 inch LCD display and easy-to-use control panel support 10 languages.

Continuous Cut
Barcode data management allows cutting different data sequentially by detecting the “Start Mark” of the new Barcode. Sequential Print & Cut process with roll-media is now available.

Supports colored marks & specialty media
A wide variety of media types including holographic paper and reflective sheets are now compatible due to improvements of the ARMS sensor algorithm.
The sensor may not be able to read certain combinations of specialty media and colored marks.

Supports Adobe Illustrator “Crop Marks”
Using the plug-in software Cutting Master 4, Adobe Illustrator crop marks will be available.

Expanded Cutting Area
The expanded cutting area to include objects outside of the area enclosed by registration marks. Production efficiency is enhanced by reducing media waste.

Configuration

Grit rolling type

Drive method

Digital servo drive

Max. cutting area (W x L)

1524mm × 50m

Cutting area of guaranteed accuracy

1250mm × 2m (1250mm × 5m)

Min. mountable media width

50mm

Max. mountable media width

1626mm (64inch)

Mountable roll media mass

20 kg

Number of push rollers

2 rollers

Max. cutting speed

1000mm/s at 45° direction

Acceleration

13.9m/s² at 45° direction

Cutting force

Max. 4.41N (450gf)

Mechanical resolution

0.005mm

Programmable resolution

GP-GL:0.1/0.05/0.025/0.01mm HP-GL™ (*2):0.025mm

Repeatability

Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction)

Minimum character size

Approx. 5 mm alphanumeric (varies depending on character font and media)

Mountable number of tools

1 tool

Blade types

Supersteel

Pen types

Oil-based ballpoint pen, Water-based fiber-tip pen

Media types

Up to 0.25mm thickness Marking film (PVC / fluorescence / reflection), polyester film (With specified conditions)

Interface

USB 2.0 (Full Speed), Ethernet 10BASE-T/100BASE-TX

Buffer memory

2MB

Command sets

GP-GL / HP-GL™ (Set by command or auto-detect) (*2)

Display

Graphic type LCD with back-light (240dots x 128dots), supports 10 languages

Power source

100V to 240V AC, 200V to 240V AC, 50 / 60 Hz

Power consumption

Up to 100W

Operating environment

10 to 35 ºC, 35 to 75 % R.H. (non-condensing)

Guaranteed accuracy environment

16 to 32 ºC, 35 to 70 % R.H. (non-condensing)

Weight

55kg (59.5kg) (approx. Includes stand and/or basket)

Compatible OS

Windows 10/8.1/7 Mac OS X 10.6 ~ 10.11 / macOS 10.12 ~ 10.15 (Graphtec Studio: 10.6 – 10.15, Cutting Master 4: 10.7 – 10.15)

דילוג לתוכן